M214215 AcroMaster Kit

This is a Radio Controlled- Electric Powered- Elapor Foam Construction
Multiplex Acro Master 3D Airplane Kit.
For Intermediate to Advanced Modeler/Flyers.

FEATURES: Molded- Elapor Foam fuselage parts- white in color
Wings: Molded- Elapor foam construction- white in color
Radio compartment: Elapor foam construction
Cowling: Elapor foam construction
Canopy: Elapor foam construction
Landing gear: Pre-bent .10" (2.6mm) diameter wire
Aileron Control: Dual Servo
Wheel pants: Elapor foam construction- white in color
Spinner cone: Elapor foam construction- white in color
Hardware: .070" (1.75mm) diameter pushrods- plastic hinges- and other
miscellaneous hardware
Designed by Aerobatic Champion Martin Mueller
Motor Mount: White plastic construction
Wheels: Elapor foam construction with metal axle sleeve

INCLUDES: Elapor foam airplane parts- pre-bent wire landing gear- 2" (51mm)
diameter wheels- fiberglass wing spar- hardware package- elapor
wheel pants and spinner cone- decals and illustrated instructions.

REQUIRES: Motor and ESC : Multiplex Power Kit (MPUG3215)- Includes Himax
HC3516-1130 Brushless Motor and Multiplex MULTIcont BL-55 ESC
Battery - 3 cell LiPo - GPMP0617
Charger - GPMM3153 (charge lead required - GPMM3148)
Radio: 4-channel radio with micro receiver
Servos: 2 16oz/in torque minimum for the ailerons - MPUM6520
2 35oz/in torque minimum for rudder and elevator - MPUM6521
Servo Extension 12": 2 required for aileron servos - HCAM2100
Y-Harness: 1 required for aileron servos - HCAM2500

SPECS: Wingspan: 43" (1095mm)
Wing Area: 557.27 sq in (36.6 sq dm)
Weight: 32-36oz (907-1020g)
Wing Loading: 8.19 oz/sq ft (25 g/sq dm)
Length: 45.25" (1150mm)
Airfoil: Fully-Symmetrical- mid-wing placement
Center of Gravity: 4-3/4" (120mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws- Low Rate High Rate
Ailerons: Up & Down 1-3/8" (35mm) 2-3/16" (60mm)
Elevator: Up & Down 1-3/8" (35mm) 2-3/4" (70mm)
Rudder: Right & Left 1-3/4" (45mm) 3-1/8" (80mm)