Extra 330S GP/EP Sport 3D ARF 79.5

This is the radio controlled- glow- gasoline or electric powered- ARF-
Great Planes 27% Extra 330S 3D Performance Series Airplane
For Intermediate to Advanced Modeler/Fliers.
Fully 3D and IMACC Compatible IMAA Legal.

FEATURES: Construction: Balsa and plywood
Wings: Two-piece- built-up- wood with aluminum joiner tube- short
aileron linkages for smooth accurate control
Covering: Factory applied Top Flite MonoKote- color scheme is yellow
and red separated by blue and silver accent stripes
Radio Compartment: Plywood construction- accesible under canopy
Cowling: Factory painted- fiberglass construction
Canopy: Vacu-molded clear plastic
Wheel Pants: Factory painted- fiberglass construction
Landing Gear: Painted fiberglass
Wheels: Two 3.5" (89mm) diameter foam main wheels
Tailwheel: Prebent wire wire with 1" (25mm) rubber tailwheel
Rudder control: Ganged dual servo- pull-pull for glow engines or tail
mounted dual servo control for gas engine (for balancing purposes)
(forward mounting position recommended for electric operation)
Aileron Control: Dual servo (one servo in each wing half)
Elevator Control: Tail mounted dual servo control
Spinner: 3.5" (89mm) diameter aluminum- 2 blade spinner with adapter
nut designed to fit into tapered prop nut used on the O.S. Max
1.60 FX glow engine
Engine Mount: Two-piece adjustable
Fuel Tank: 24oz (720cc) approx. suitable for glow fuel only- can
be converted for gasoline usage
Hardware: IMAA legal- forward (pull-pull system) or aft (pushrod
system)- engine mount & miscellaneous screws
Building Time: Ready to fly in only 20-24 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at date
of purchase.

INCLUDES: Pre-built and covered wings- fuselage and tail assemblies- pushrods-
decals- pre-bent main landing gear- tailwheel wire- 3.5" (89mm) main
wheels- 1" (25mm) tailwheel- adjustable engine mount- fuel tank
3.5" (89mm) spinner- aluminum wing joiner- hardware package and
photo-illustrated manual

REQUIRES: Engine: 1.50-1.80 cu in (25-29 cc) 2 stroke
OR 1.80-2.10 cu in (30-34 cc) 4 stroke
OR 1.90-2.60 cu in (32-43 cc) gasoline
OR 63-62-250 RimFire Outrunner Brushless motor- ESC and battery
Muffler: Pitts-Style (Engine mounts on its side)
Radio: At least 4 channel radio with electronic mixing recommended
for ultimate 3D flight performance
Receiver Battery: At least 1500mAh capacity
Servos: 6 high-torque (2-elevator- 2-aileron- 2-rudder) 1 standard
torque for throttle
(6 servos required for electric flight)
Servo Extension 24": 4- 2 required for aileron servos- and 2 for
elevator servos - HCAM2721 if mounting receiver in aft radio tray
OR
2 36" [914mm] servo extensions for the elevators if mounting receiver
in the forward radio tray (HCAM2726)
2 more 24" [610mm] servo extensions for rudder servos if mounting in
them in the aft location under the horizontal stabilizer and using
the aft radio tray (HCAM2721)
OR
2 36" [914mm] servo extensions for rudder servos if mounting them in
the aft location under the horizontal stabilizer and using the
forward radio tray (HCAM272)
2 Dual servo connectors such as Futaba Dual Servo Extension
Extension Futaba J (FUTM4130) for rudder and servos
Building and field equipment

SPECS:    Wingspan: 79.5" (2025mm)
Length:   78"   (1980mm)
Weight:   13.5 - 15.5lbs (6125-7030g)
Wing Area: 1209 sq. in. (77.9 sq dm)
Wing Loading: 26-29 oz/sq. ft. (79-90 g/sq dm)
Airfoil: Fully symmetrical- mid wing placement
Center of Gravity: 5-1/4" (133mm) Back from the wing's leading edge
Control Throws-   3D Rate        High Rate          Low Rate
Elevator:     2" (50mm)      1"      (25mm)      5/8" (16mm)
Rudder:      6" (150mm)      4-1/2" (115mm)    3"     (76mm)
Ailerons: 1-1/2" (38mm)      1-1/4"  (32mm)      3/4" (19mm)

COMMENTS: Following are the Top Flite MonoKote colors used on this model and
order numbers for 6ft rolls;
Missile Red    TOPQ0201      Aluminum  TOPQ0205
Metallic Blue  TOPQ0402      Yellow    TOPQ0203