1.60-50cc Reactor ARF

This is the Radio Controlled- Glow- Gasoline- or Electric Powered
Almost-Ready-to-Fly Great Planes Performance Series Reactor 1.60 Scale Airplane
IMAA Legal- this model is ideal for a flyer's first
giant scale aerobatic and 3D airplane.

FEATURES: Construction: Laser cut balsa and plywood with a foam sheeted turtle
deck
Wings: Two-piece- bolt-on with aluminum joiner tube
Covering: TopFlite MonoKote
Landing Gear: Pre bent aluminum  0.16" (4mm) thick
Wheels: Main- 3.5" (88mm) diameter foam- tailwheel- 1" (25.4mm)
rubber
Radio Compartment: Hatch removes easily with four bolts
Spinner: Aluminum 3.25" (82.5mm) diameter
Cowling: Painted fiberglass
Wheel Pants: Painted fiberglass
Canopy: Clear molded plastic
Aileron Control: Dual servo
Elevator Control: Dual servo
Fuel Tank: Approximately 24oz (720cc) for glow fuel- must purchase
gasoline conversion kit and tubing if using gasoline engine
Engine Mount: Two piece composite construction
Hardware: Full set provided- IMAA legal
Assembly Time: Only 15-20 hours
Warranty Period: Great Planes guarantees this kit free from defects
in both material and workmanship at the date of purchase.

INCLUDES: Pre-built and covered wings- fuselage and tail assemblies- pushrods-
landing gear- wheels- wheel pants- cowl- fuel tank- wood servo
trays- aluminum spinner two decal sheets- hardware package- photo-
illustrated instructions

REQUIRES: Engine: 1.60 - 2.10 cu in (26 - 34cc) two-stroke OR
2.00 - 2.20 cu in (33 - 36cc) four-stroke OR
2.5 - 3.0 cu in (43 - 50cc) gasoline (Desert Aircraft DA-50 gas
engine recommended- not carried) OR
80-75-230 Outrunner Brushless Motor
Radio: 5-6 channel- 6-channel computer radio recommended
Servos: Eight- 7 high-torque- 1 standard ball bearing
6" (152mm) Heavy Duty Servo Extensions: Two/inboard aileron control
24" (610mm) Heavy Duty Servo Extensions: Two/outboard aileron control
36" (914mm) Heavy Duty Servo Extensions: Three for tail servos
1.5" (38mm) Large Scale Single Side Servo Arms: Seven
Y-Harness: Two heavy duty
Receiver Battery: 4.8 or 6V at least 4200mAh
Heavy duty switch harness and charge jack
#4 Plastic Washers: For cowl
Misc. Items: Building and field equipment

SPECS:    Wingspan:     84.5" (2140mm)
Wing Area:    1556 sq in (100.4 sq dm)
Weight:       14 - 17 lb (6.35 -7.71 kg) depending on power setup
selected
Length:       85" (2160mm)
Airfoil: Fully symmetrical
Center of Gravity: 7" (178mm) from the leading edge of the root wing
rib
Control Throws:  Low             High              3D
Elevator: 1"     (25mm) 10?  1-1/2" (38mm)  15?  3-1/4" (83mm)  34?
Rudder:   2-3/4" (70mm) 16?  4-3/4" (121mm) 28?  5-3/4" (146mm) 35?
Ailerons: 1-1/2" (38mm) 11?  2-1/2" (64mm)  19?  4-1/2" (114mm) 36?

COMMENTS: The 38% Extra 330S Pilot Bust (GPMA3207) also fits nicely under the
canopy of this aircraft.

Following is a list of MonoKote colors used to cover this model and
order numbers for 6ft rolls;
White     TOPQ0204         Sapphire Blue    TOPQ0226
Orange    TOPQ0202         Missile Red      TOPQ0201