ElectriFly Edge 540 E-Performance 3D ARF

This is the electric powered- radio controlled- almost ready to fly
ElectriFly Edge 540 3D Aerobatic Airplane.
This Edge 540 3D is part of the ElectriFly E-Performance Series.
For intermediate to experienced flyers 14 years of age and older.

FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and
airfoiled control surfaces- motor box preinstalled with blind nuts
providing perfect spacing for spinner backplate-no need for
measuring- cowl ring also preinstalled
Wings: Two piece with carbon fiber wing joiner and single screw
attachment
Motor Mount: Built-up plywood
Covering: Top Flite MonoKote
Aileron Control: Dual servo
Cowl: Prepainted fiberglass- attaches with rare earth magnets
Canopy: Clear- single
Wheel Pants: Prepainted ABS
Landing Gear: Prepainted aluminum 0.079" (2mm) thick
Wheels: Two foam 1.75" (44mm) diameter
Spinner: Red plastic- 1.75" (44mm) diameter
Hardware: Full set included
Building Time: Approximately 4-6 hours
Warranty: Great Planes Model Manufacturing Company guarantees this
kit to be free from defects in both materials and workmanship at
date of purchase.

INCLUDES: ElectriFly ARF Edge 540 3D Aerobatic Airplane with fiberglass cowl-
ABS wheel pants- landing gear- wheels- hardware- photo-illustrated
instruction manual and two decal sheets

REQUIRES: Radio: 4 channel
Servos: 4-micro
Dual Servo Extension: For aileron servos
6" (150mm) Slim Extension Wire: Two
16" (400mm) Servo Extension: Two
Motor: Rimfire 35-30-1250 outrunner
35A ESC for Brushless Motors:
Battery: LiPo 1500mAh 11.1V
Cell Balancer: For LiPo battery-
Battery Charger: LiPo compatible
Propeller: 10x7E

SPECS:??? Wingspan: 41" (1040mm)
Wing Area: 353 sq in (22.9 sq dm)
Weight: 29 - 32.0 oz (820 - 910g)
Airfoil: Fully symmetrical- mid wing placement
Wing Loading: 11.8 - 13.1 oz/sq ft (36 - 40 g/sq dm)
Length: 39.5" (1005mm)
Center of Gravity: 2-1/2" (64mm) back from the leading edge of the
wing at the side of the fuselage

Control Throws-? Low Rate????????? High Rate?????????? 3D
Elevator:?? 1/2" (13mm) 8?? 1-1/8" (29mm) 19????? 2-1/4" (57mm)40?
Rudder:???? 2" (51mm)?? 19? 2-3/4" (70mm) 27????? 3-3/4" (94mm)39?
Ailerons:?? 5/8" (16mm) 11? 1-1/8" (29mm) 20????? 1-3/4" (44mm)33?

COMMENTS: Following are the MonoKote colors used on this model and stock
numbers for six foot rolls;
Metallic Blue TOPQ0402?????????? Missile Red?? TOPQ0201
Yellow??????? TOPQ0203?????????? White???????? TOPQ0204