Home New Products Account Shopping Cart

Currency:

4510 Nitro Sport SE RTR Traxxas - TRA4510

4510 Nitro Sport SE RTR



This is the Traxxas Nitro Sport Ready-to-Run 1/10 scale Stadium Race Truck 

with TQ Traxxas Pistol Grip Radio and On-Board Push Button EZ Start System, 

TRX Pro.15 Engine and Pre-painted Body (see listing below). 

This kit is based on the Nitro Rustler. 



****As of 6/05/06 the Nitro Sport has the following new features;**** 

New Six Color Body Graphics 

EZ-Start Controller with Electronic Diagnostics 

Rubber Sealed Bearings 

Chrome TRX Pro-Star Wheels with Pre-Glued Tires 

Updated Owner's Manual 

Grey Ultra Shocks with White Powder-Coated Springs 

High-Torque Steering Servo 



****As of 1/28/09 the Nitro Sport has the following new features;**** 

Five color ProGraphix body with bolt-on wing 

Alias dual pin rear tires and ribbed front tires with foam inserts 

Twin Spoke chrome wheels 



Pre-Painted Bodies: 

TRAC50A2-Red and Silver 

TRAC50A4-Black and Silver 

TRAC50A5-Silver 

TRAC50A6-Blue and Silver 



FEATURES: (RTR) Ready To Run with radio system installed 

T-6 flat aluminum chassis rear and black fiber composite front 

Countersunk holes under the chassis 

Fiber composite upper plate/front brace 

4 composite oil-filled Ultra shocks with white powder coated springs 

4-wheel independent suspension 

Telescoping U-joint drive shafts 

281 Magnum, 6 (5x11mm) ball bearing transmission with adjustable 

slipper clutch and planetary gear differential with steel internal 

gears 

75cc fuel tank with flip-top lid and primer bulb 

Adjustable turnbuckle tie-rods 

Composite black tuned pipe with pressure fitting 

Disc brake (composite) 

Fiberglass front hinge pin brace (tie bar) 

Five color ProGraphix painted body with bolt-on wing 

Twin Spoke 2.2" wheels 

Alias dual pin rear tires and ribbed fron tires with foam inserts 

Single point steering 

Black colored composite parts 

Front and rear bumpers 

Pre-installed servo saver on servo 

Black composite cover for the receiver and receiver battery box 

Servo reversing and trim on radio 

Air filter (one stage, bell shaped) 

Ballon type receiver cover 

2.5 ounce (75cc) fuel tank with rubber mount cushions 

Pre-painted polycarbonate body with rear spoiler 

Push button EZ start system with battery and charger 

powered by a 6-cell battery (not included) that heats glow plug 

and starts the engine with an on-board motor. 

2-shoe clutch system 

TRX Pro.15 engine w/ round alum heatsink (non-anodized) head 

foam bell type air filter, ball bearings, short crankshaft, 

ABC construction, easy adjust two needle carburetor, 

on-board electric motor start system and glow starter, 

starter, tuned pipe, glow plug, metal throttle arm, 

aluminum piston with oil groove, channeled beam conecting rod 

TQ pistol grip 2-channel radio system with servo reversing, 

trim adjustments, receiver battery box, switch harness, 

70/30 or 50/50 throttle neutral, standard throttle servo and high- 

torque steering servo,red light power indicator (low when flashing)



SPECS: Length: 17.27" (439mm) 

Front track: 12-1/2" (318mm) 

Rear track: 12-3/8" (314mm) 

Weight: 62 ounces (without radio) 

Height: 6" (152mm) 

Wheelbase: 11.313" (287mm) 

Wheel diameter: 2.2" 

Fuel capacity: 2.5 ounces (75cc) 

Engine: TRX Pro.15 

Gear ratio: Adjustable 8.43:1 to 12.64:1 

Differential: Planetary gear type (not ball) 

Brake: Disc 

Chassis: Double-decked (aluminum and composite) 

Spur gear: 70 black nylon tooth (32 pitch) 

Clutch bell: 20 tooth black steel (32 pitch) 

Castor block front 30 degrees 



INCLUDES: One TQ pistol grip radio 

One Nitro Sport assembled with TRX-Pro .15 and two glow plugs 

One Pre-Painted ProGraphix Body and Spoiler 

One Decal sheet 

One EZ start module with battery and charger 

One Black plastic shock collars and pistons 

One Antenna tube and cap 

Six 5x11mm ball bearings in transmission 

Eight 5x11mm metal bushings for wheels 

Two 5x10mm bearings for clutch 

One Extra receiver cover balloon 

One Instructions 

One Window mask sheet 

One fuel bottle 



REQUIRES: 12 "AA" batteries 

Fuel 



BOX DIMENSIONS: 12.75" W. X 9.38" H. X 20.00" L.

BOX WEIGHT: 8.97 LBS.






Tell A Friend

Your Price: $274.99

Qty:

Availability:  In Stock


 

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment