M214210 Twin Star II Kit

This is the radio controlled- electric powered- almost ready to fly
Multiplex Twin Star II Airplane.
For Intermediate Modeler/Fliers.

FEATURES: Construction: Elapor foam
Wings: Two-piece foam with GRP tubular wing joiner
Radio Compartment: Easily accessible under wing
Motors: Two Multiplex Permax 6 volt 400 size with connector board
and cables
Landing Gear: None- model is intended for hand launches and belly
landings
Aileron Control: Dual Servo
Hardware: Control horns- rods and all mounting hardware included
Motor Mount: Wing mounted plastic motor brackets

INCLUDES: Elapor foam fuselage and wing halves- pushrods- two 400 size motors
with connector board and cables- two propellers and spinners
hardware package- tail section- decals- photo-illustrated
instructions

REQUIRES: Speed Control: Electronic
Battery: 7 or 8-cell flat
Charger: Timed or peak
Radio: 4-Channel
Servos: Four micro (2-ailerons- 1-elevator- 1-rudder)
Two Servo Extensions 12" (305mm): For aileron servos
Y-Harness: For aileron servos
Building and Field Equipment: Medium CA glue- activator- tools

SPECS: Wingspan: 56" (1420mm)
Wing Area: 665 sq in (43 sq dm)
Weight: 53 oz (1500g)
Wing Loading: 11.5 oz/sq ft (35 g/sq dm)
Length: 43" (1085mm)
Airfoil: Semi-symmetrical- high wing
Center of Gravity: 3.3" (85mm) from the wing's leading edge at the
fuselage sides.
Control Throws-
Ailerons: Up +0.71" (+18mm) & Down -0.39" (-10mm)
Elevator: Up +0.94" (+24mm) & Down -0.59" (-15mm)
Rudder: Right & Left 0.79" (20mm) each side