M214226 Easy Glider Pro Kit Built/Glider/Elec

This is the radio controlled- glider or electric powered
Multiplex Easy Glider Pro almost ready to fly Sailplane.

FEATURES: Construction: Elapor foam to resist damage- white in color
Wings: Two piece with fiberglass wing joiner
Spinner: Elapor foam 2.2" (55mm) diameter
Aileron Control: Dual servo
Control Surfaces: Elevator- rudder and ailerons

INCLUDES: One Multiplex Easy Glider Pro with decal sheet- foam spinner- wing
joiner- pushrods- hardware and illustrated instruction manual

REQUIRES: Radio System: 4-channel with micro receiver
Servos: Two micro size for elevator & rudder
Two nano size for ailerons
Servo Extensions: Two 16" (200mm) for aileron servos
Y Harness: For aileron servos
Battery: at least 2100mAh
Battery Charger: LiPo compatible
If building as glider only the following items are required;
NiMH Receiver Battery (at least 1800mAh)
Switch Harness with Charge Jack
Launching Kit
If installing electric power the following items are required;
Easy Gilder Pro Power Set #33 2636 or upgraded Power Set #33 2642
Propeller Driver and Spinner #73 3500 (MPUG3226)
Building and Field Equipment: Medium viscosity regular (NOT syrofoam
safe) CA glue and activator- see COMMENTS

SPECS: Wingspan: 71" (180.3cm)
Length: 43.7" (112.3cm)
Flying Weight: 28.5oz (810g) with standard power system
Wing Loading: 6.5 oz sq ft (20 g sq/dm) with standard power system
Wing Area: FAI approx. 226 sq in (41.6g/sq dm)
Airfoil: Semi symmetrical
CG (Center of Gravity): 2.7" (70mm) from leading edge at wing root
measured at fuselage side
Control Throws-
Elevator- Up and Down: 0.31-0.39" (8-10mm)
Rudder- Left and Right: 0.59-0.79" (15-20mm)
Ailerons- Up: 0.59" (15mm)
Down: 0.24" (6mm)
Spoilers-Both Ailerons Up: 0.79" (20mm)
Spoiler Mixer (Elevator Trim Compensation): 0.16" (4mm)