30 Phoenix-30 Hi Volt ESC Brushless

This is the Castle Creations Phoenix-30 High Voltage Electronic Speed Control.
For use with Brushless motors only.

FEATURES: Extremely Low Resistance (0.005 Ohms)
Safe "Power On" arming program ensures motor will not accidentally
turn ON
Low torque soft start protects gear boxes and belt drives from shock
Dual Opto-Coupled (No BEC)
Microprocessor controlled tough surface mount construction
Audible arming signal
10AWG wiring for motor and battery leads
Smooth reverse exponential throttle
Self-calibrating endpoints maximize usable stick travel
Auto shut-down when throttle is lost
Simple setup no complicated switches or wiring

INCLUDES: Phoenix 30 High Voltage speed control w/universal connector 10AWG
motor and battery wires and instruction sheet

REQUIRES: Bullet-type motor connectors.
Suggested Connectors: 3.5mm (GPMM3112/GPMM3113)
Battery Connectors - depends which connector is used on battery.
Suggested Connectors: Ultra plugs (WSDM3001)

SPECS: Length: 2" (50mm) with capacitors
Width: 1" (25.4mm)
Height: 0.5" (13mm)
Weight: 1oz (27g) wires included
Throttle RF Shielding: Opto Isolated Throttle Cable
Castle Link Compatible: Yes
Max Input Voltage: 50 volts
Max Amp Draw: 30 amps
Resistance: 0.005 ohms
Wire size for motor and battery leads: 10AWG

COMMENTS: This speed control does NOT feature BEC. You must use an alternate
power source for your receiver and servos.