Traxxas - TRA7108
7108 1/16 E-Revo VXL RTR 
This is the electric powered, radio controlled, ready to run
1/16 scale Traxxas E-Revo VXL Racing Monster Truck.
FEATURES: Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type
Drive: Four wheel
Radio: Traxxas TQ 2-channel 27MHz AM with waterproof digital high-
torque steering servo, waterproof receiver box, transmitter does
not have charge jack
Electronic Speed Control: Traxxas VXL-3m waterproof, with high-
current connector, training mode, reverse and low voltage detection
for use with 2S and 3S LiPo packs
Motor: Traxxas Velineon 380 brushless motor with Neodymium magnets,
sintered rotor and high RPM ball bearings, 3.5mm gold plated bullet
connectors
Spur Gear: 45 tooth
Pinion Gear: 28 tooth 48 pitch, extra pinion gear included for 50+
MPH operation with extra battery (see below)
Battery: One Traxxas Power Cell 6-cell stick NiMH with high current
connector, dual battery capability (extra battery (TRAC2925) and
series adapter (TRAP3063) not included and must be purchased
separately), vehicle is also compatible with 2S and 3S LiPo packs
(not included) LiPo mode on ESC must be selected
Battery Charger: 110V wall type
Body: Painted and trimmed with applied decals
Bumper: Front, black chrome
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
telescoping universal joint shafts
Transmission: Ball bearing equipped with adjustable slipper clutch
Differentials: Sealed silicone filled planetary gear type
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Multi terrain, with foam inserts 1.8" (46mm) wide, 3.2"
(82mm) diameter
Wheels: Gemini 5-spoke with black chrome finish 1.5" (38mm) wide,
2" (51mm) diameter, standard size 12mm hex
Steering arm with spring loaded servo protection
INCLUDES: RTR Traxxas E-Revo VXL Racing Monster Truck with 2-ch radio,
painted body, 6-cell battery, charger, extra pinion gear and
instruction manual
REQUIRES: AA Batteries: Eight for transmitter
SPECS: Vehicle-
Length: 12.9" (328mm)
Width: 9.4" (239mm)
Height: 4.6" (117mm)
Front and Rear Track: 9.4" (239mm) distance between outer edges of
wheels
Wheelbase: 7.9" (202mm)
Ground Clearance: 1.7" (43mm)
Body-
Length: 11.3" (288mm)
Width: 4.3" (110mm)
Height: 2.8" (71mm)
BOX DIMENSIONS: 9.63" W. X 8.75" H. X 14.63" L.
BOX WEIGHT: 5.84 LBS.
Tell A Friend
|
| | |
|
