8FGHS Super 2.4GHz R6208SB Mode 2

This is the Futaba 8FGHS Super 2.4GHz 14-Channel Radio System
with the R6208SB Receiver and No Servos.
This is the helicopter version which will default to heli settings
when powered up and has a spring loaded throttle stick.

This version is Mode 2-Left Hand Throttle and Right Hand Elevator, USA Standard

FEATURES: Ideal for flybarless helis and all other heli applications
New software with menus that support 3-axis gyros and that are
tailored to Futaba's super-fast CGT750 gyro
VPP (Variable Pitch Propeller) compatibility can be set to three
conditions for throttle and pitch curve
Swash trim can be adjusted from swash screen
Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
very quickly virtually eliminating signal conficts and
interruptions unlike other 2.4GHz systems that only stay on one or
two frequencies
Fourteen total transmitter channels, 12 proportional and 2 switched
20-model memory expandable to unlimited model setups and downloads of
online software updates with a 32MG - 2GB SD memory card (memory
card not included, must be purchased separately)
R6208SB receiver accepts a wide range of batteries, from 4-cell NiCd
and NiMH packs to 2S LiFe and LiPo packs with no regulator required
Receiver is capable of controlling up to eight channels using the
outputs for a conventional system and up to eighteen channels
including the two digital channels by using the output for the
S.BUS system, receiver also has a high-speed mode that delivers
ultra fast frame rates on channels 1-6
SensorTouch programming
Factory defined mixes
Stick calibration menus
Trainer system (must purchase Trainer Cord, FUTM4405)
One year limited warranty through Hobby Services beginning at date of
purchase

INCLUDES: 8FGHS Transmitter
R6208SB Receiver, FUTL7668
HT6F1700B 1700mAh NiMH Transmitter Battery, FUTM1480
HBC-2B(4) Battery Charger, FUTM1805
Switch Harness
Neck Strap
Instruction Manual

REQUIRES: Servos such as the Futaba S9252, S9255, S3151 and S3001

SPECS: Transmitter;
Transmitting Frequency: 2.4GHz band
Modulation: 2.4GHz 7ch or 2.4G multi-channel switchable
Power Supply: 7.2V HT6F1700B NiMH Battery
R6208SB Receiver;
Power Requirement: 3.7 - 7.4V battery or regulated output from ESC*
Size: 0.98 x 1.86 x 0.56" (24.9 x 47.3 x 14.3mm)
Weight: 0.49oz (13.8g)
*When using ESCs make sure that the regulated output capacity meets
your usage application

BOX DIMENSIONS: 10.25" W. X 4.75" H. X 16.00" L.
BOX WEIGHT: 4.03 LBS.