E Flite - EFL2250
Mini Ultra Stick ARF
Features
Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer
95% factory-built; get flying in 2 hours or less
Lightweight balsa and plywood construction
Two firewall options to use a variety of motor sizes- types & brands
Includes molded firewall stick mount
Control surfaces have factory-installed hinges and control horns
Bolt-on tail requires no gluing and secures with two lock nuts
Optional quad-flap configuration
Tough- lightweight aluminum landing gear that's factory-assembled and tall enough to accommodate larger prop sizes
Covered in genuine Hangar 9 UltraCote
Great match for E-flite Park 450 Outrunner Brushless Motor
Easy access top battery hatch
Design based on Hangar 9?s popular line of Ultra Sticks
Overview
Based on the popular Hangar 9 Ultra Stick- the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick?s fun factor are two firewall options that let you use a wide variety of motor sizes- types and brands. This along with the ample clearance for larger props that its tall- lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.
The Mini Ultra Stick can be assembled and ready for flight in just 1 to 2 hours thanks- to:
- Preinstalled control surfaces and hinges
- Preinstalled control horns
- Preinstalled pushrods
- Bolt-on horizontal and vertical stabilizers
- Preassembled landing gear with wheels attached
Tech Notes
You will need...
Brushless Motor
Brushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
4 to 6-Ch Receiver
Li-Po Battery
Li-Po Charger
CA
Propeller
Specifications
Wingspan: 38.75 in (985mm)
Overall Length: 34 in (865mm)
Wing Area: 325 sq in (21 sq dm)
Flying Weight: 22 - 25 oz (625 - 710g)
Motor Size: Park 400 Inrunner or Park 450 Outrunner
Radio: 4-channel or greater (7-channel for quad flaps)
Servos: 4 sub-micros (6 sub-micros for quad flaps)
Trim Scheme Colors: UltraCote Fluourescent Blue- Flame Red- Transparent Red & White
CG (center of gravity): 2.25 in (57mm) behind the leading edge
Prop Size: 10x7 - 11x7
Hardware Included: Yes
Speed Control : 20A Brushless
Recommended Battery: 2100 mAh 3-Cell 11.1V Li-Po
Flaps: Yes (optional)
Control Throw (Ailerons): 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
Control Throw (Elevator): 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
Control Throw (Rudder): 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
Approx. Flying Duration: 10-20 minutes
Scale: Park Flyer
Approx. Assembly Time: 1-2 hours
Gear Ratio: 6.5:1 when using Park 400 Brushless Inrunner
Tell A Friend
|
| | |
|
