Cap 232 BP ARF

Features 
Ingenious open-structure balsa/light-ply design minimizes weight and maximizes strength
Light wing loading and large control surfaces for astonishing freestyle and 3D capability
90% factory-built and covered in genuine UltraCote
Carbon fiber pushrods
All hardware and an Outrunner Stick Mount are included
Out-of-the-box compatibility with E-flite outrunner or inrunner brushless motors

Overview 
The CAP 232 BP 3D combines the sturdy construction of a balsa/light-ply airframe with the uninhibited 3D capability of a lightweight profile park flyer. It?s all made possible by its intelligently engineered- open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wood airframe. This feather-light construction- combined with a high-output brushless motor- will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote? and UltraCote Lite so you can be up and flying in no time.

Tech Notes 
You will need...
6-channel transmitter (for proper mixing and dual rate capabilities) 
Micro receiver 
4 sub-micro servos 
Motor 
20A Brushless ESC 
11x3.8 Slow Flyer Prop 
Battery & Charger

Specifications 
Wingspan: 35.5 in (900mm)
Overall Length: 35.5 in (900mm)
Wing Area: 425 sq in (27.5 sq dm)
Flying Weight: 15.5-17 oz (440-480g)
Motor Size: Park 450 or Park 400
Radio: 6 channels (for proper mixing)
Servos: 4 sub-micro
Trim Scheme Colors: UltraCote White (HANU870)- Sky Blue (HANU875)- Bright Yellow (HANU872)- UltraCote Lite Transparent Blue (HANU969)- UltraCote Lite Transparent Clear (HANU964)
CG (center of gravity): 4-3/4" (120mm) back measured from the center of the leading edge of the wing next to the fuselage
Prop Size: 11x3.8 Slow Flyer
Hardware Included: Yes
Speed Control : 20A Brushless
Recommended Battery: 11.1V 3-cell 910-1320mAh Li-Po
Control Throw (Ailerons): 1.25" (32mm) with 20% Expo on Low or 1.75" (45mm) with 43% Expo on High Up/Down
Control Throw (Elevator): 2" (50mm) with 20% Expo on Low or 3" (75mm) with 49% Expo on High Up/Down
Control Throw (Rudder): 3" (75mm) Low & High Left/Right
Scale: Park Flyer
Approx. Assembly Time: 3-4 hours