AT-6 Texan 25 ARF

Features 
90% complete?just a few hours of assembly and you?re flying
Lightweight construction
Fully sheeted airframe to help maintain scale appearance
Covered in genuine Hangar 9? UltraCote?
Retract- and flap-ready right from the box
Optional Robart retractable landing gear is available separately
Factory-painted fiberglass cowl and scale scoops
Scale finish and markings
Firewall designed to accept E-flite? Power 25 BL outrunner motor
Plug-in outboard wing panels for convenient transport and storage
Easy-access magnetic battery hatch
Extremely accurate scale outline worthy of the most demanding scale modelers
Wing utilizes two Selig airfoils for optimum flight performance at all speeds

Overview 
E-flite?s AT-6 25e ARF is a superb scale replica of the legendary ?Texan? trainer used by the U.S.?and its allies?from WWII through the late 1960s. It features a level of scale detail that is exceptional for an ARF of this size. You get all this realism without having to spend weeks of building- covering and painting. Just about everything has been done for you before you even open the box. All that?s left to do is a few hours of final assembly and radio installation. When you?re done- you?ll have a fantastic-flying scale warbird your friends will swear you scratch-built yourself.

The AT-6 is the first in E-flite's Platinum Series. Our PLATINUM SERIES delivers superior- enhanced features and meticulous attention to detail. The Platinum Series is one more way that E-flite brings you the most advanced electric flight experience. 

The AT-6 25e comes out of the box with all kinds of details that have been finished for you- including a factory-painted fiberglass cowl- air scoops- dummy radial engine- painted canopy and pilot- scale strut covers- scale trim scheme and much more. And- the Texan?s sheeted airframe compares favorably to its full-scale cousin. It helps maintain the model?s strict scale appearance and strong flight performance. Scale airfoils were used to maintain the exact scale outline of the AT-6 Texan's tail surfaces to include counterbalances. Both the elevators and rudder are pre-hinged out of the box and ready for installation. An optional detailed cockpit kit is available separately (EFL4512)- which includes an aft instrument hood- main fuselage rollover structure- two seat backs- and a floor. One pilot is included with the kit and an additional pilot is available separately (EFLA150). Genuine Hangar 9? UltraCote? provides a durable- refined finish.

The scale split flaps are operational and pre-hinged right out of the box. Using a unique pin interlock system- they plug together and operate using only 2 servos. Optional Robart retracts (EFL4515) are available that have been specially designed for the AT-6 25e. Making these mechanical retracts functional is as simple as installing a servo and connecting the pre-bent wire linkages. 

Getting to the battery and speed control is a cinch. Just lift off the hatch- which adheres tightly to the fuselage thanks to a strong- permanent magnet that won?t fall off mid-flight. The large battery compartment can accommodate a wide range of Li-Po packs. Transportability is significantly increased by plug-in horizontal stabilizer halves and outboard wing panels. The center wing section also removes from the fuselage with only two bolts for more convenience.

Specifications 
Wingspan: 54 in (1370mm)
Overall Length: 39 in (990mm)
Wing Area: 455 sq in (29.4 dm)
Flying Weight: 3.9?4.5 lb (1.8?2.0 kg)
Motor Size: Power 25 (not included)
Radio: 6 channels w/7 micro servos (not included)
Servos: (7) JR SPORT? MC35 (1) JR SPORT RT88 for optional retracts (not included)
Trim Scheme Colors: Ultracote Light Gray (HANU882)- True Red (HANU866)- and Cub Yellow (HANU884)
Prop Size: APC 12x8E (not included)
Hardware Included: Yes
Speed Control : 40?60 amps (not included)
Recommended Battery: 11.1V 4200mAh 3-cell Li-po (not included)
Scale: Standoff scale
Approx. Assembly Time: 6?8 hours