Hobbico - HCAA2025
NexSTAR .46 Trainer ARF
This is the radio controlled- glow powered- Almost Ready-to-Fly-
Hobbico NexSTAR .46 trainer airplane.
For Beginner Modeler/Fliers.
** This version does not include a radio- pilot assist link- engine- **
NexSTAR Simulation Software- and the learn-to-fly guarantee.
With such features as SpinControl
Airfoil Extensions- SpeedBrakes and Training Flaps
no other trainer offers so much help for the first-time pilot.
FEATURES: Construction: Balsa and plywood
Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
alignment and includes a built-in aileron servo mount- wing halves
are joined with a steel rod.
Flat bottom high mount configuration
One-piece- all wood precision airfoil with SpinControl Airfoil
Extensions that provide lift even in a stall to keep the
NexSTAR level and the pilot in control.
PivotFlex Wing Mounting System fastens with one 1/4-20x2 nylon wing
bolt (GPMQ4402)-a rubber retainer and pivoting channel absorb minor
jolts of normal use- more severe jolts cause the wing to separate
from the fuselage and escape the full force of impact.
Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
section of wing near fuselage and hold airspeed to a minimum to
insure smooth landings- removeable as pilot skills increase
Covering: Polyester based heat shrink- color scheme is White and Red
with Silver accents. True Red TOPQ0227
Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts-
(US Patent #6-886-780) lock in place with a snap and provide the
strongest landing gear of any trainer- also easily removeable
Aileron Control: Requires single standard size servo- wings are built
with dual aileron servo trays for future upgrades as skills
increase- can also be equipped with flaps
Tail Mounting: EasyAlign System guides parts into place automatically
in perfect alignment without tools
Building Time: Ready to fly in 3-5 hours
Warranty Period: Hobbico guarantees this kit free from defects in
both material and workmanship at purchase date. This warranty
does not cover any component part damaged by use or modification.
INCLUDES: Pre-built and covered wings- fuselage and tail assemblies-
pre-bent main landing gear with three 2?" (70mm) foam main
wheels- steerable nose gear- IsoSmooth aluminum and rubber engine
mount- 9.1oz (270cc) fuel tank- 2?" (57mm) red plastic spinner
pushrods- linkages- and photo-illustrated instructions
REQUIRES: Radio: 4-channel
Servos: Four standard size (1-throttle- 1-rudder- 1-elevator-
1-elevator)
Engine: .46 cu in (7.5cc) engine (*see comments below)
Model airplane fuel
Building and field equipment
Charging Rx and Tx batteries
SPECS: Wingspan: 68.75" (1746mm)
Wing Area: 722 sq in (46sq dm)
Weight: 6.5lb-6.75lb (2835g-3060g) ready to fly
Wing Loading: 20-21 oz/sq ft (61-66g/sq dm)
Length: 56" (1420mm)
Airfoil: High-Wing
Center of Gravity: 3-3/16" (81mm) forward limit
3-9/16" (90mm) aft limit from the wing's leading
edge at the fuselage sides
Control Throws-
Elevator: Up & Down ?" (13mm)
Rudder: Right to Left ?" (19mm)
Ailerons: Up ?" (13mm) Down 3/8" (9mm)
Right Thrust Angle-3?
Down Thrust Angle-4? wing respect to wing incidence
COMMENTS: Wings are equipped with dual aileron servo trays if dual aileron
servos are desired. If you wish to use flaperons you will need to
upgrade your radio system to 6 channels. The instruction manual
list parts needed and information to perform these conversions.
"
Tell A Friend
|
| | |
|
