F-35 V2 64mm PNP EDF

Overview

Features
280mm fiber pipe inserted through the fuselage and main wing
Use of four inner-hexagon screws instead of glue improves main wing set and landing gear installation optimizing strength of structure
Improved main wing set and landing gear installation. This optimizes strength of structure and reduces assembly time
More powerful 64mm 11-blade ducted fan with up to 800 grams of thrust
2840-KV3900 motor
Five 9g servos
Predator 40A ESC
FMS EPO foam material creates stronger, more impact-resistant planes
Environmentally friendly water-based paint minimizes blistering from sun
Pre-installed, newly designed control horns allows more throw


Needed To Complete
4+ Channel Radio System
LiPo Battery and Charger

What's in the box?
(1) F-35 V2 64mm
(1) User Manual

Overview
Inspired by the superior features of the original model, version two (V2) of the FMS F-35 64mm has improved mechanical and structural features that will enhance air performance and decrease assembly time.
A fiber pipe greatly enhances the wing strength for enhanced flying maneuvers. An improved main wing set and landing gear installation optimizes strength of structure and reduces assembly time.
Plus, the latest 64mm ducted fan can achieve more than 800 grams of thrust.
The differences in speeds between the V1 and V2 will be noticeable. If you've got the “need for speed,” accessories such as missiles can be removed to create a faster, more streamlined model.

Specifications

Wingspan: 27.5 in (698mm)
Overall Length: 37.8 in (960mm)
Flying Weight: Approximately 32.5 oz (920g)
Motor Size: Brushless 2840-KV3900 with 64mm Fan Unit
Servos: 9G Servo - (5)
CG (center of gravity): 3.6 - 3.8 in (93-98mm) From Leading Edge
Speed Control : 40A
Recommended Battery: Li-Po 11.1V 2200mAh 35C
Aileron: Yes
Elevator: Yes
Rudder: Yes
Throttle: Yes
Flaps: No
Retracts: No
Assembly Time: Less than 1 Hour